Pottery Production in Ancient Akrotiri Reading Answers

We have provided Pottery Production in Ancient Akrotiri reading practice test below. It contains 14 questions like Choose the correct option, Sentence Completion, Yes/No/Not Given and Matching headings.

Table of contents:

• Solution for Pottery Production in Ancient Akrotiri
• Pottery Production in Ancient Akrotiri IELTS Reading Practice Test
• Passage
• Questions
• Answers with Explanations

Solution for Pottery Production in Ancient Akrotiri

Pottery Production in Ancient Akrotiri reading answers are given here in the below table. You may cross-check your answers.

Answer Table

1. B	5. D	9. YES	13. A
2. D	6. C	10. NO	14. B
3. A	7. NOT GIVEN	11. YES
4. E	8. NO	12. YES

Pottery Production in Ancient Akrotiri IELTS Reading Practice Test - Exam Review

Check out our YouTube Channel to Practice Full-Length IELTS Reading Tests Daily

 

The applicants must attempt all the questions in the Pottery Production in Ancient Akrotiri Reading Answers.

Passage

We have provided a Pottery Production in Ancient Akrotiri practice test below, read it carefully and answer the questions 1-14.

Pottery Production in Ancient Akrotiri

A. Excavations at the site of prehistoric Akrotiri, on the coast of the Aegean Sea, have revealed much about the technical aspects of pottery manufacture, indisputably one of the basic industries of this Greek city. However, considerably less is known about the socio-economic context and the way production was organised.

B. The bulk of pottery found at Akrotiri is locally made, and dates from the late fifteenth century BC. It clearly fulfilled a vast range of the settlement’s requirements: more than fifty different types of pots can be distinguished. The pottery found includes a wide variety of functional types like storage jars, smaller containers, pouring vessels, cooking pots, drinking vessels and so on, which all relate to specific activities and which would have been made and distributed with those activities in mind. Given the large number of shapes produced and the relatively high degree of standardisation, it has generally been assumed that most, if not all, of Akrotiri pottery was produced by specialised craftsmen in a non­domestic context. Unfortunately neither the potters’ workshops nor kilns have been found within the excavated area. The reason may be that the ceramic workshops were located on the periphery of the site, which has not yet been excavated. In any event, the ubiquity of the pottery, and the consistent repetition of the same types in different sizes, suggests production on an industrial scale.

C. The Akrotirian potters seem to have responded to pressures beyond their households, namely to the increasing complexity of regional distribution and exchange systems. We can imagine them as full time craftsmen working permanently in a high production-rate craft such as pottery manufacture, and supporting themselves entirely from the proceeds of their craft. In view of the above, one can begin to speak in terms of mass-produced pottery and the existence of organised workshops of craftsmen during the period 1550-1500 BC. Yet, how pottery production was organised at Akrotiri remains an open question, as there is no real documentary evidence. Our entire knowledge comes from the ceramic material itself, and the tentative conclusions which can be drawn from it.

D. The invention of units of quantity and of a numerical system to count them was of capital importance for an exchange-geared society such as that of Akrotiri. In spite of the absence of any written records, the archaeological evidence reveals that concepts of measurements, both of weight and number, had been formulated. Standard measures may already have been in operation, such as those evidenced by a graduated series of lead weights - made in disc form - found at the site. The existence of units of capacity in Late Bronze Age times is also evidenced by the notation of units of a liquid measure for wine on excavated containers.

E. It must be recognised that the function of pottery vessels plays a very important role in determining their characteristics. The intended function affects the choice of clay, the production technique, and the shape and the size of the pots. For example, large storage jars (pithoi) would be needed to store commodities, whereas smaller containers would be used for transport. In fact, the length of a man’s arm limits the size of a smaller pot to a capacity of about twenty litres; that is also the maximum a man can comfortably carry.n.

F. The various sizes of container would thus represent standard quantities of a commodity, which is a fundamental element in the function of exchange. Akrotirian merchants handling a commodity such as wine would have been able to determine easily the amount of wine they were transporting from the number of containers they carried in their ships, since the capacity of each container was known to be 14-18 litres. (We could draw a parallel here with the current practice in Greece of selling oil in 17 kilogram tins)

G. We may therefore assume that the shape, capacity, and, sometimes decoration of vessels are indicative of the commodity contained by them. Since individual transactions would normally involve different quantities of a given commodity, a range of ‘standardised’ types of vessel would be needed to meet traders’ requirements.

H. In trying to reconstruct systems of capacity by measuring the volume of excavated pottery, a rather generous range of tolerances must be allowed. It seems possible that the potters of that time had specific sizes of vessel in mind, and tried to reproduce them using a specific type and amount of clay. However, it would be quite difficult for them to achieve the exact size required every time, without any mechanical means of regulating symmetry and wall thickness, and some potters would be more skilled than others. In addition, variations in the repetition of types and size may also occur because of unforeseen circumstances during the throwing process. For instance, instead of destroying the entire pot if the clay in the rim contained a piece of grit, a potter might produce a smaller pot by simply cutting off the rim. Even where there is no noticeable external difference between pots meant to contain the same quantity of a commodity, differences in their capacity can actually reach one or two litres. In one case the deviation from the required size appears to be as much as 10-20 percent.

I. The establishment of regular trade routes within the Aegean led to increased movement of goods; consequently a regular exchange of local, luxury and surplus goods, including metals, would have become feasible as a result of the advances in transport technology. The increased demand for standardised exchanges, inextricably linked to commercial transactions, might have been one of the main factors which led to the standardisation of pottery production. Thus, the whole network of ceramic production and exchange would have depended on specific regional economic conditions, and would reflect the socio-economic structure of prehistoric Akrotiri.

Questions

Questions 1-2
Choose the correct letter, A, B, C or D.

What does the writer say about items of pottery excavated at Akrotiri?
There was very little duplication.
They would have met a big variety of needs.
Most of them had been imported from other places.
The intended purpose of each piece was unclear.

2. The assumption that pottery from Akrotiri was produced by specialists is partly based on
the discovery of kilns.
the central location of workshops.
the sophistication of decorative patterns.
the wide range of shapes represented.

Questions 3-6

Complete each sentence with the correct ending, A-F, below.

Write the correct letter, A-F.
Write your answers in boxes 3-6 on your sheet.

the discovery of a collection of metal discs.
the size and type of the sailing ships in use.
variations in the exact shape and thickness of similar containers.
the physical characteristics of workmen.
marks found on wine containers.
the variety of commodities for which they would have been used.

3. The assumption that standard units of weight were in use could be based on
4. Evidence of the use of standard units of volume is provided by
5. The size of certain types of containers would have been restricted by
6. Attempts to identify the intended capacity of containers are complicated by

Questions 7-12

Do the following statements agree with the views of the writer in Reading Passage? Write

YES, if the statement agrees with the claims of the writer
NO, if the statement contradicts the claims of the writer
NOT GIVEN, if it is impossible to say what the writer thinks about this

Reading Passage 3 has six paragraphs.
Which paragraph contains the following information?
Write the correct letter A-F in boxes 37-40 on your answer sheet.
NB: You may use any letter more than once.

7. There are plans to excavate new areas of the archaeological site in the near future
8. Some of the evidence concerning pottery production in ancient Akrotiri comes from written records.
9. Pots for transporting liquids would have held no more than about 20 litres.
10. It would have been hard for merchants to calculate how much wine was on their ships.
11. The capacity of containers intended to hold the same amounts differed by up to 20 percent.
12. Regular trading of goods around the Aegean would have led to the general standardisation of quantities.

Questions 13-14
Choose the correct letter, A, B, C or D.

13. What does the writer say about the standardisation of container sizes?
Containers which looked the same from the outside often varied in capacity.
The instruments used to control container size were unreliable.
The unsystematic use of different types of clay resulted in size variations.
Potters usually discarded containers which were of a non-standard size.

14. What is probably the main purpose of Reading Passage 3?
To evaluate the quality of pottery containers found in prehistoric Akrotiri.
To suggest how features of pottery production at Akrotiri reflected other developments in the region.
To outline the development of pottery-making skills in ancient Greece.
To describe methods for storing and transporting household goods in prehistoric societies.

Answers for Pottery Production in Ancient Akrotiri with Explanations

The Pottery Production in Ancient Akrotiri answers with explanations are given below. It will assist you in understanding the format of the reading test and will allow you to correct your errors.

1. Answer: B
Explanation: The author claims that in the archaeological site of Akrotiri, a variety of pottery used for various storage and consumption functions have been discovered.

2. Answer: D
Explanation: The archaeologists have assessed that the many pottery forms discovered at Akrotiri were produced by skilled artisans.

3. Answer: A
Explanation: The discovery of multiple graded lead discs has led archaeologists to infer that a calibrated system of measurement was likely in use.

4. Answer: E
Explanation: Archaeologists believe a calibrated method of volume measuring was used because they discovered many wine jars that were graded.

5. Answer: D
Explanation: The dimensions of the various pots, according to the archaeologists, were greatly influenced by the physical characteristics of the potters.

6. Answer: C
Explanation: Finding the volume of the excavated vessels has proven to be exceedingly challenging because to the variations in their shape and size.

7. Answer: NOT GIVEN
Explanation: N/A

8. Answer: NO
Explanation: Pottery found at the archaeological site has provided the majority of the information on the Akrotiri people.

9. Answer: YES
Explanation: The pots could only carry quantities that were little more than 20 litres, according to the archaeologists.

10. Answer: NO
Explanation: The size of the containers aboard the ships would determine the amount of wine that the traders brought, according to the researchers.

11. Answer: YES
Explanation: The ability of containers to store volumes varies despite having comparable shapes by over 20%.

12. Answer: YES
Explanation: Because of the growing trade in products across the Aegean, ceramic manufacture became more regular or standardized.

13. Answer: A
Explanation: The ability of containers to store volumes varies despite having comparable shapes by over 20%.

14. Answer: B
Explanation: We can better comprehend the social and economic circumstances in certain areas of the ancient city of Akrotiri by studying the ceramic industry and its commerce.

Other Reading Tests

• Global warming reading answers
• The death of the wild salmon reading answers
• Green wave washes over mainstream shopping reading answers